TECHNOLOGY TO BUILD ON

Additives

KB International has a variety of additives that may be necessary for your drilling or cutter project. Your KB representative can provide you with the additives necessary for the specific soil formations anticipated. See below a list of KB polymer system additives.

 

EnhancIt 100

EnhancIT 100 is a water soluble, light tan, free flowing powdered material. The EnhancIT 100 is the primary fluid loss additive for the Enhanced System as well as assists in gel membrane formation. (22lb Pail)

Product Data Sheet   SDS

 

 

EnhancIt 200

EnhancIT 200 is a water soluble, light tan, free flowing powdered material. The EnhancIT 200 is the primary solids control additive for the Enhanced System as well as assists in gel membrane formation. (22lb Pail)

Product Data Sheet   SDS

 

SlurryPro MPA

SlurryPro MPA is a synthetic polymer in liquid form which functions to form a more tenacious and less permeable polymeric membrane at and within the formation interface. It also promotes a soft grouting effect within the membrane area in porous soils. MPA additionally functions within KB Systems to assist in dropping light suspended solids from the slurry. (5 Gallon Pail)

Product Data Sheet   SDS

 

ImPac

ImPac is a specialty polymer in dry form which functions to increase the strength of the fluid membranes soft grout attributes in low cohesion soils. It also assists in controlling fluid loss by strengthening the membrane. ImPac may also be made into a low concentration liquid to assist with rapid sedimentation of suspended fines from the slurry. (22lb Pail)

Product Data Sheet   SDS

 

KobbleBlok

KobbleBlok is a specialty polymer which rapidly swells to form various size deformable globules. These polymeric swollen globules seek porous zones and help the system to control fluid loss by filling these larger pores or voids. (22lb Pail)

Product Data Sheet   SDS

 

InstaFreeze

InstaFreeze is a clear heavy liquid used to converting the soft-grouting effect of a SlurryPro membrane in low cohesion soils to a more persistent and stronger chemical grout, thereby increasing soil stability even in the most challenging of soils. (5 Gallon Pail)

Product Data Sheet   SDS

 

 

Protek-100 (Caustic Soda)

ProTek-100 acts to chelate all hardness, iron, magnesium, calcium, etc. from both make-up water and ground water. ProTek 100 additionally functions to rejuvenate polymer which has been damaged by extreme carbonate alkalinity, seawater, or cationic contamination. This dramatically lowers the refreshment dosages of polymer in contaminated systems as well as corrects contaminated systems. (5 Gallon Pail)

Product Data Sheet   SDS

 

Magma-Fiber

Magma Fiber is mineral fiber used in specific situations for heavy fluid loss. When added to the polymer, it clings to sidewalls and acts as a plug in porous soils to prevent fluid from escaping excavation area and provides increased sidewall stability. It is available as a coarse or fine grind. (25 pound bags)

© Copyright 2015 KB International – All Rights Reserved.

Website Design by amyvitranocreative